Question # 1 of 10 ( Start time: 09:47:31 PM ) Total
Marks: 1
How many methods exist for building routing table?
Select correct option:
1
2 ok
3
4
Question # 2 of 10 ( Start time: 09:47:54 PM ) Total Marks: 1
A__________ is a special-purpose computer dedicated to the task of interconnecting networks.
Select correct option:
Router ok
Bridge
Switch
Question # 3 of 10 ( Start time: 09:48:15 PM ) Total Marks: 1
If a link or a packet switch fails then which one of the following would possibly be happened?
Select correct option:
Link would be reestablished
Request to change failed hardware would appear
The packet switch will modify the tables ok
None of the above
Question # 4 of 10 ( Start time: 09:48:36 PM ) Total Marks: 1
Dotted decimal represents each octet in ________ and uses a dot to separate octets.
Select correct option:
binary
decimal ok
hexadecimal
Octal
Question # 5 of 10 ( Start time: 09:48:57 PM ) Total Marks: 1
In Closed-form computation, the protocol address assigned to a computer is chosen carefully so that computer’s hardware address can be computed from the protocol address using basic Boolean and _________ operations.
Select correct option:
arithmetic ok
XOR
Shift
XNOR
Question # 5 of 10 ( Start time: 09:48:57 PM ) Total Marks: 1
As the Internet grew, the original Classful addressing scheme became a limitation. The IP address space was being exhausted because all networks had to choose one of three possible sizes.
Select correct option:
True ok
False
Question # 7 of 10 ( Start time: 09:49:41 PM ) Total Marks: 1
There are two standard implementations to improve computational efficiency: Hashing and Direct indexing
Select correct option:
True ok
Fal
Question # 8 of 10 ( Start time: 09:50:06 PM ) Total Marks: 1
Asynchronous Transfer Mode uses the concept of --------------------.
Select correct option:
Connection-less networking
Connection-oriented networking ok
Question # 9 of 10 ( Start time: 09:50:26 PM ) Total Marks: 1
Which of the following is not a benefit of source independence?
Select correct option:
It allows fast and efficient routing.
Packet switch do not need to have complete information about all destinations
Network functions even if topology changes
None of the above ok
Question # 10 of 10 ( Start time: 09:51:31 PM ) Total Marks: 1
___________ places the boundary between the third and fourth octets
Select correct option:
Class A
Class B
Class C ok
Class D
How many methods exist for building routing table?
Select correct option:
1
2 ok
3
4
Question # 2 of 10 ( Start time: 09:47:54 PM ) Total Marks: 1
A__________ is a special-purpose computer dedicated to the task of interconnecting networks.
Select correct option:
Router ok
Bridge
Switch
Question # 3 of 10 ( Start time: 09:48:15 PM ) Total Marks: 1
If a link or a packet switch fails then which one of the following would possibly be happened?
Select correct option:
Link would be reestablished
Request to change failed hardware would appear
The packet switch will modify the tables ok
None of the above
Question # 4 of 10 ( Start time: 09:48:36 PM ) Total Marks: 1
Dotted decimal represents each octet in ________ and uses a dot to separate octets.
Select correct option:
binary
decimal ok
hexadecimal
Octal
Question # 5 of 10 ( Start time: 09:48:57 PM ) Total Marks: 1
In Closed-form computation, the protocol address assigned to a computer is chosen carefully so that computer’s hardware address can be computed from the protocol address using basic Boolean and _________ operations.
Select correct option:
arithmetic ok
XOR
Shift
XNOR
Question # 5 of 10 ( Start time: 09:48:57 PM ) Total Marks: 1
As the Internet grew, the original Classful addressing scheme became a limitation. The IP address space was being exhausted because all networks had to choose one of three possible sizes.
Select correct option:
True ok
False
Question # 7 of 10 ( Start time: 09:49:41 PM ) Total Marks: 1
There are two standard implementations to improve computational efficiency: Hashing and Direct indexing
Select correct option:
True ok
Fal
Question # 8 of 10 ( Start time: 09:50:06 PM ) Total Marks: 1
Asynchronous Transfer Mode uses the concept of --------------------.
Select correct option:
Connection-less networking
Connection-oriented networking ok
Question # 9 of 10 ( Start time: 09:50:26 PM ) Total Marks: 1
Which of the following is not a benefit of source independence?
Select correct option:
It allows fast and efficient routing.
Packet switch do not need to have complete information about all destinations
Network functions even if topology changes
None of the above ok
Question # 10 of 10 ( Start time: 09:51:31 PM ) Total Marks: 1
___________ places the boundary between the third and fourth octets
Select correct option:
Class A
Class B
Class C ok
Class D
Comments
Post a Comment
Please give us your feedback & help us to improve this site.